Operation of sealed garbage trucks

We all know that sealed garbage truck is a vehicle used to transfer waste, so sometimes the government also wants to purchase relatively large capacity, so you can save some costs, but when driving a large sealed garbage trucks would have to follow some Rules, otherwise the consequences could be disastrous. In the previous period, there was a garbage truck that was out of control in Shenzhen, resulting in one death and six injuries. There are many such lessons, but it is always too late to regret it.

In daily use, there are actually many minor problems that are easily overlooked by the driver's friends. This will become a hidden danger in the work process. Today, we will talk about some of the matters needing attention when driving a sealed garbage truck .

1. Before driving, make sure that the vehicle is safe and the brakes are tight. Avoid driving on the road without knowing the situation. Drivers must ensure that they have an accurate understanding of the status of the garbage truck and that they will not cause any hidden trouble on the road.

2. When driving on the road, make sure that the low speed is uniform and there is no sudden braking. The garbage truck is a large-scale loading and unloading truck. Sometimes the speed is too fast to cause the brake to malfunction. If you are in a busy area, you need to use the 40 speed to drive.

3. When unloading, make sure that there are no people on both sides of the vehicle and at the rear to ensure their safety.

4. Before the driving operation is completed, the power take-off switch must be closed to separate the power takeoff device from the gearbox, and the oil pump should stop rotating. Then place the manual operation valve in the neutral parking position to avoid automatic lift during driving. Danger.

5. When the driver is working with the gear pump, he should first depress the clutch pedal and then open the power take-off switch to avoid impact when the power take-off gear is engaged.

6. In the process of lifting, there will be lifting process of the car. In the lifting process, there must be no facilities or people around the range of 5 meters. The operator can not leave the cab, but also control the engine speed within 2000r/min. Remember to not increase the throttle so as not to damage the limit valve and other mechanical parts.

7. When the vehicle is running, the chassis power take-off must stop. The manually operated valve must be in the neutral parking position. It is forbidden to operate the manual control valve to the lift and down position.

8. Pay attention to the maintenance of the garbage truck, check the vehicle parts regularly, if it is damaged, please stop using it, and contact the refitting factory after sale.

We also just summed up some of the matters that need attention. The specific needs of the driver's friends should be summarized in the daily operation, pay more attention, and be sure to ensure the safety of pedestrians on the road.

1. cable drag chain(Cable Carrier &energy chain) can be used for such locations where reciprocating motions are required so that internally installed cables , oil pipes, gas tubes and water tubes can be dragged and protected.

2. The appearance of the cable chains like the crawler of a tank consisting of certain number of joints, they are freely turned roud.

3. Dongjun jx cable carrier can add spacers to separate the inside space.

4. Material of cable drag chain is nylon or steel 

5. resistance of cable carrier: oil and salt resistance 

Cable Drag Chain

Cable Drag Chain,Cable Chain,Cable Carrier,Cable Towline

Cangzhou Dongjun Machinery Accessories Co., Ltd. , https://www.cablechainfactory.com