Determinants of Vibration Aging of ZYB960 High Temperature Residue Pump

Residual oil pump vibration aging depends on the choice of vibration aging process. Vibration aging process is more complex, must be box-like parts of the pre-vibration process analysis, design and optimization of vibration parameters to improve the effect of vibration aging. According to the workpiece material, structure, the form and process of manufacturing rough, analysis of the distribution of residual stress field box, dimensional accuracy requirements, as well as the working load, the possible causes of failure and other factors were analyzed, and then decide to implement the vibration aging Craft line and the key parts of aging. Botou City Taibang Valve Manufacturing Co., Ltd. production of residue pump, three screw pump, the significant advantages of simple structure, small size, allowing high speed, stable and reliable work, small pressure pulsation, stable flow, low noise, high efficiency, Is a high viscosity insulation pump. For asphalt storage, oil, heavy oil depot and thermal oil vapor heating, asphalt, heavy oil and other equipment. High temperature residue pump ZYB960 suitable for conveying non-corrosive, non-solid particles, solidified at room temperature medium, especially for outdoor installation in the alpine region and the process medium needs insulation, the insulation medium temperature pump Up to 250 ℃, the viscosity is 5-1500cst. ZYB960 high temperature residue pump and we usually use the same can be used for the same occasion, but also can completely replace the residue pump. ZYB960 high temperature residue pump during installation need to pay attention to five issues: 1, the installation should pay attention to the arrow on the valve body should be consistent with the media flow. 2, should ensure that the supply voltage is 15% -10% of the rated voltage fluctuations within the normal work. 3, high temperature residue pump ZYB960 thoroughly cleaned before installation of the pipeline. In the pipeline access to the media to ensure that no impurities. The valve should be installed before the filter. 4, after installation, the pipeline may not have reverse pressure. 5, when the high temperature residue pump ZYB960 failure or cleaning, in order to ensure the continued operation of the system should be installed bypass device