PEAK's Series of 4 Auto Lift
Model | Lifting Capacity |
409 | 4.0T (9,000 lbs) |
409A | 4.0T (9,000 lbs) |
412 | 5.5T (12,000 lbs) |
412A | 5.5T (12,000 lbs) |
414 | 6.5T (14,000 lbs) |
414A | 6.5T (14,000 lbs) |
FeatureÂ
• Electric-air control operation system.
• Mechanical self-lock and air-drived safety release.
• Electrical hydraulic power system, cable-drived.
• Non-skid diamond platform.
• Adjustable platform and adjustable safety lock ladders.
• Two adjustable turntable positions to fit the different wheel base.
• Dual safety device: In case the primary safety locks are out of operation,the lift would also be locked automatically by a second safety device.
• Optional Jack: RJ-7A with SPX Air pump and 1.5", 2.5" extension adapters included.     Â
• Long warranty:
5 Years warranty on lift structure(including Columns, Carriage, Lifting Arms, Top Beam, Floor Cover, Platform, Cross Beam, Car Drive-in Ramp, Scissor, Baseframe etc.);Â
2 Years warranty on the hydraulic parts (including cylinders, oil seal, oil hose, fitting etc.);Â
1 Year warranty on the spare parts, electrical components, power unit (not including consumption parts such as rubber pad).
Economic garage car wheel alignment equipment for auto shop(414A)
Model | 414A | ||
Style | Alignment Four Post Car Lift | ||
Lifting Capacity | 6.5T (14,000lbs) | ||
Lifting Time | 60 Seconds | ||
A | Overall Length (With Ramps) | 6528mm (257") | |
B | Overall Length (No Ramps) | 5500mm(216 1/2") | |
C | Overall Width | 3324mm(130 7/8") | |
D | Width Between Columns | 2946mm(116") | |
E | Lifting Height | 1915mm(75 3/8") | |
Gross Weight | 1546kg(3,408lbs) | ||
Motor | 4.0HP | ||
Packing Dimension | 5530 X 560 X 780 mm | ||
QTY of Container | 12 Units/20'GP | ||
24 Units/40'GP |
EVERY PEAK LIFT IS FOR THE CUSTOMERS WHO NEED GOOD QUALITY PRODUCTS AT COMPETITIVE PRICE!
 Economic garage car wheel alignment equipment for auto shop(414A)
PEAK's Series of 4 Auto Lift
Model | Lifting Capacity |
409 | 4.0T (9,000 lbs) |
409A | 4.0T (9,000 lbs) |
412 | 5.5T (12,000 lbs) |
412A | 5.5T (12,000 lbs) |
414 | 6.5T (14,000 lbs) |
414A | 6.5T (14,000 lbs) |
FeatureÂ
• Electric-air control operation system.
• Mechanical self-lock and air-drived safety release.
• Electrical hydraulic power system, cable-drived.
• Non-skid diamond platform.
• Adjustable platform and adjustable safety lock ladders.
• Two adjustable turntable positions to fit the different wheel base.
• Dual safety device: In case the primary safety locks are out of operation,the lift would also be locked automatically by a second safety device.
• Optional Jack: RJ-7A with SPX Air pump and 1.5", 2.5" extension adapters included.     Â
• Long warranty:
5 Years warranty on lift structure(including Columns, Carriage, Lifting Arms, Top Beam, Floor Cover, Platform, Cross Beam, Car Drive-in Ramp, Scissor, Baseframe etc.);Â
2 Years warranty on the hydraulic parts (including cylinders, oil seal, oil hose, fitting etc.);Â
1 Year warranty on the spare parts, electrical components, power unit (not including consumption parts such as rubber pad).
Economic garage car wheel alignment equipment for auto shop(414A)
Model | 414A | ||
Style | Alignment Four Post Car Lift | ||
Lifting Capacity | 6.5T (14,000lbs) | ||
Lifting Time | 60 Seconds | ||
A | Overall Length (With Ramps) | 6528mm (257") | |
B | Overall Length (No Ramps) | 5500mm(216 1/2") | |
C | Overall Width | 3324mm(130 7/8") | |
D | Width Between Columns | 2946mm(116") | |
E | Lifting Height | 1915mm(75 3/8") | |
Gross Weight | 1546kg(3,408lbs) | ||
Motor | 4.0HP | ||
Packing Dimension | 5530 X 560 X 780 mm | ||
QTY of Container | 12 Units/20'GP | ||
24 Units/40'GP |
EVERY PEAK LIFT IS FOR THE CUSTOMERS WHO NEED GOOD QUALITY PRODUCTS AT COMPETITIVE PRICE!
Â
Air Source Heat Pump
Cooling capacity: 20kW-50kW
Characteristics:
1.Structure. Panels and base frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.
2.Compressor. Hermetic scroll type compressor, equipped with the crankcase heater and thermal protection with thermal overload cut-out and crankcase heater mounted on rubber vibration isolators.
3.Axial fan. External rotor type axial fans, equipped with single phase direct drive motors, low noise 6 poles, protection level IP54, provided with a protective outlet grille.
4.Evaporator. High efficiency and low pressure drop stainless steel (AISI 316) water exchangers, with anti-freeze heating element (option) and differential pressure switch, factory insulated with flexible close cell material.
5.Condenser. Coils are consisting of seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins, 100% fully quality tested; sub cooling circuit to prevent freezing at the base (optional); protected with metal grill.
6.Desuperheater: High efficiency stainless steel brazed plate heat exchanger, factory insulated with flexible close cell material (optional).
7.Refrigerant circuit. Copper tube connection with charge valve, filter, sight glass, gas-liquid separator, thermostatic expansion valve, low pressure switch with automatic reset, high pressure switch with manual reset. The heat pump unit is completed also with 4-way valve, liquid receiver and one way valve.
8.Water circuit. Built with air vent valve, water drain connection, and female-threaded hydraulic connectors. Water pump (8kW-30kW), differential pressure switch. Expansion tank (8kW-30kW)
9.Electric panel. Consists of:
Compressor contactor
Compressor protection breaker
Fan motor protection breaker
Control circuit protection breaker
Phase sequence relay (only for 3-phase)
Programmable microprocessor controller
10.Optional
Additional electric heater embedded in the coils for defrosting in low temperature ambient. It must be factory installed
Stainless steel covering
Remote condenser
Tube in tube heat exchanger
Water circuit electric heater
Air Source Heat Pump
Air Source Heat Pump,Hot Water Air Source Heat Pump,Heating Air Source Heat Pump,Scroll Air Source Heat Pump
Jinan Amrta Air Conditioning Co.,Ltd , https://www.waterchiller.pl