200-300kg/H Small Sunflower Seeds Shell Removing Machine

TFKH-600 model Small complete set of sunflower seeds shell removing machine

Introduction for sunflower seeds shell removing machine
It is the newest product based on TFKH-1200.TFKH-600 adopts single sheller settings,use variable frequency technology to control sheller apartly, the seeds unshelled will automatic enter next shelling cycle,develop shelling efficiency largely.
 
This unit can finish shelling,peeling,sorting and checking sunflower seeds once-time,the primary equipment of sunflower seeds kernel process industry.
 
With small floor area,low invest,high shelling rate,low crushing rate,high automatic degree and easy operation and maintain.
 
It is made up of hopper,bucket elevator,single sheller,checking machine,receiver,control cabinet.
 
Main data for sunflower seeds shell removing machine
Model:TFKH-600
Main power:4.9kw(380V)
Production capacity: 0.2-0.3t/h( as different materials)
Whole kernel rate:≥90%( less than 1/2 whole kernel is crushed kernel)
Seed rate in crude kernel:≤2-5%
Floor area:6.4*2.4m
Installation height:2.8m
Weight:2ton
  TFKH-600 model Small complete set of sunflower seeds shell removing machine

Introduction for sunflower seeds shell removing machine
It is the newest product based on TFKH-1200.TFKH-600 adopts single sheller settings,use variable frequency technology to control sheller apartly, the seeds unshelled will automatic enter next shelling cycle,develop shelling efficiency largely.
 
This unit can finish shelling,peeling,sorting and checking sunflower seeds once-time,the primary equipment of sunflower seeds kernel process industry.
 
With small floor area,low invest,high shelling rate,low crushing rate,high automatic degree and easy operation and maintain.
 
It is made up of hopper,bucket elevator,single sheller,checking machine,receiver,control cabinet.
 
Main data for sunflower seeds shell removing machine
Model:TFKH-600
Main power:4.9kw(380V)
Production capacity: 0.2-0.3t/h( as different materials)
Whole kernel rate:≥90%( less than 1/2 whole kernel is crushed kernel)
Seed rate in crude kernel:≤2-5%
Floor area:6.4*2.4m
Installation height:2.8m
Weight:2ton
 

Roller Bearings are a type of Rolling-Element Bearing that uses cylinders (rollers) to maintain the separation between the moving parts of the bearing (as opposed to using balls as the rolling element). The purpose of a roller bearing is to reduce rotational friction and support radial and axial loads. Compared to Ball Bearings, roller bearings can support heavy radial loads and limited axial loads (parallel to the shaft). They can operate at moderate to high speeds (although maximum speeds are typically below the highest speeds of ball bearings). The lubrication method must carefully considered during the design phase when using roller bearings.

Roller Bearings

Roller Bearings,Precision Roller Bearings,Non-Standard Roller Bearings,Rolling-Element Bearing

Ningbo Ritbearing Imp & Exp Co.,Ltd. , https://www.nbbearing.de