Chu Sheng tanker maintenance and use of tanker


Hubei Chusheng Special Purpose Vehicle Co., Ltd. has achieved remarkable achievements in the course of several years of development. "Chusheng" brand has been promoted to China's well-known trademarks. Undoubtedly the biggest encouragement to Hubei Chusheng Special Purpose Vehicle Co., Ltd. Hubei Chusheng tank trucks here again reminded users of the use and maintenance of mobile refueling tankers.

(1) On-board pump-type flow refueling tanker The oil separator is equipped with a filter, which consists of a copper wire mesh and a felt net cover. A triangular cover on the side wall of the separator can remove the filter. The filter of the combination pump dispenser is installed in the oil inlet. The submersible pump dispenser is equipped with a special filter box. Open the end cap to remove the filter. The filter should be cleaned regularly with petrol (usually at least once a month), the damage should be replaced, and the dirt in the oil machine removed to protect the oil pump and flow meter.

(2) The relief valve adjustment screw on the onboard pump and combination pump is used to adjust the pressure of the pump, and then regulate the oil discharge amount of the mobile refueling tanker. It is adjusted at the factory. After long-term use, if the oil discharge rate drops, the adjustment screw can be tightened inwards to increase the pump pressure, but it does not exceed 0.3 MPa, so that the oil discharge capacity meets the requirements.

(3) The combined pump-type mobile refueling tanker is only suitable for underground tanks. If high tanks are used, the exhaust pipe will be exposed to oil and the exhaust pipe must be blocked.

(4) When using the oil gun, avoid using the oil filling pipe of the oil gun to hit the oil container, press the switch and other abnormal operations, so as to avoid damaging the oil gun and causing oil leakage. Check and tighten the stop screws on the filling pipe regularly to prevent loosening and damage to the root of the filling pipe.

(5) The underground oil tanks should be regularly cleaned to keep the oil clean.

(6) The adjustment of the accuracy of the whole machine shall be carried out in accordance with the relevant provisions of the "JJG443-86 Fuel Dispenser Verification Regulations."

(7) Check the electrical part of the mobile refuelling vehicle must first cut off the power supply, and avoid electrification. Do not damage the flameproof surface when opening the explosion-proof box. The foreign matter in the explosion-proof cavity during reassembly shall be cleaned, the cable sealing shall be good, the metal pads and gaskets shall not be lost, the number of screws shall be sufficient, and the tightening shall be reliable to ensure the explosion-proof performance of the electrical components.

Computer Refueler

Dongfeng KangBa tanker | 6-8 tons tanker

Dongfeng Dolika Oil Tanker | Dongfeng Kaipute Oil Tanker | 7-10 Ton Oil Tanker
Xigong Chusheng (Hubei) Special Purpose Vehicle Co., Ltd. is a research, development, manufacturing, sales Chusheng brand tanker, Dongfeng tanker, Foton tanker, liberation tanker, sprinkler, sanitation truck garbage truck , garden sprinklers, Dongfeng sprinklers, fire sprinklers, high pressure cleaners, concrete mixers, cement mixers, refuellers, oil tankers, sewage suction trucks, garbage trucks, suction trucks, bulk cement trucks, powder materials Vehicles, lorry crane trucks, lorry cranes, coach vehicles, led advertising vehicles, flatbed trucks, excavator trucks and other special vehicles, a total of more than 200 varieties of wholly-owned private enterprises in seven series, is the Dongfeng company , FAW Group, CNHTC Group, Beiqi Futian Company network modification member manufacturers, covers an area of ​​150,000 square meters, construction area of ​​100,000 square meters, more than 560 employees, more than 180 various types of engineering and technical personnel, the main production equipment more than 300 Taiwan (sets), which have advanced flexible sealing device for can body heads and 8×9000 electronically controlled digital display board machine, 9-meter puzzle automatic welding machine, German Burger large-displacement double-screw air compressor, PLC control wind The company has more than 90 million yuan in total investment in domestic leading equipment and tooling molds and testing instruments, such as force circulation machine shot peening rooms, water spinner spray booths, drying rooms and machining, and punching plasma cutting machines. Strong technical force, advanced inspection methods, and perfect products have won wide acclaim from users for their high quality and low price, reliable performance, and timely service.

Clutch Handle

Clutch Handle,Clutch Lever Motorcycle,Motorbike Clutch Lever,Motorcycle Clutch Handle

Ruian Leimeng locomotive parts Co., Ltd , https://www.leimenglocomotive.com

Posted on