Recently, American indoor lighting company ByteLight has used its LED light indoor positioning technology to obtain a $3 million Series A financing, including FlywheelVentures and Motorola Solutions VentureCapital.
Unlike other service providers that use WiFi signals for indoor positioning, ByteLight chose LED indoor positioning. LED luminaires with ByteLight chips embedded will emit a flashing signal (which is not perceptible to the naked eye). When the consumer opens an application that supports ByteLight, the camera will detect these signals to identify the user's current location.
ByteLight's positioning technology is to transform LED lamps on the production line. Each new lamp costs 10 cents more than ordinary lamps. Its positioning technology is accurate to within 1 meter and the position is calculated in less than one second.
In business mode ByteLight is a form of technology licensing. Instead of producing chips or producing lamps, it provides hardware technology licenses and supporting mobile application technologies to vendors (and developers). At present, the customers of ByteLight indoor positioning service are mainly retailers. In addition to being used for indoor navigation, it is more important that retailers can market based on the specific location of the consumer in the store and ultimately influence consumer decisions.
Brief Introduction:
MB series Rod Mill has certain selective grinding effect in the grinding process because the grinding medium and ore are line contacted. The product particle size is uniform, and excessive grinding ore grain is little. It is widely used in fine crushing and grinding operation of feldspar, quartz, abrasive, refractory material, cement, steel grit, slag, copper ore, iron ore, gold ore grit and other hard or brittle material.
Features:
1. When the diameter of rod mill is less than 3200mm its conventional configuration is using rolling bearing instead of bearing bush sliding bearing energy saving 10% - 20%;
2. When the diameter of rod mill is more than 2700mm its conventional configuration is using slow driving for maintenance installing liner use;
3. When the diameter of rod mill is less than 1500mm its conventional configuration is monolithic large chassis reducing the installation time and installation requirements;
4. When the power of rod mill is less than 110 KW it uses cage asynchronous motor; When the power of rod mill is more than 110 KW it uses wire wound asynchronous motor; When the power of rod mill is more than 400 KW it can use high pressure (6 KV or 10 KV) asynchronous motor or the TDMK series high voltage (6 KV or 10 KV) synchronous motor;
5. Drum Feeder Spiral Feeder and Joint Feeder are available for meeting different working condition;
6. The gear lubrication mode has grease lubrication thin oil lubrication and automatic oil mist lubrication for meeting different working condition;
7. The bearing lubrication has manual and electric grease lubrication pump to select and it can realize lubrication automation;
8. There are a variety of liner plates type to select. Compared to A series standard type B series energy-saving type can save energy 10% - 20%.
Technical Parameters:
Model | Effective volume (m3) | Max. steel rod load(t) | Capacity (t/h) | Power (kW) | Weight (t) |
φ900×1800 | 1 | 2.3 | 2-6 | 15 | 4.2 |
φ900×2100 | 1.1 | 2.5 | 2.2-6.6 | 18.5 | 4.9 |
φ1200×2400 | 2.4 | 5.4 | 4.8-14 | 30 | 8.7 |
φ1200×3000 | 3 | 6.8 | 6-18 | 37 | 13 |
φ1500×3000 | 4.8 | 11 | 9.6-29 | 75 | 15 |
φ1500×4500 | 7.1 | 16 | 14-43 | 110 | 16 |
φ1830×3000 | 7.1 | 16 | 14-43 | 130 | 28 |
φ1830×4500 | 10.6 | 24 | 21-64 | 155 | 32 |
φ2100×3000 | 9.4 | 21 | 19-56 | 155 | 42 |
φ2100×3600 | 11.3 | 25 | 23-68 | 180 | 44 |
φ2100×4000 | 12.6 | 28 | 25-76 | 210 | 50 |
φ2100×4500 | 14.1 | 32 | 28-85 | 245 | 52 |
φ2200×3600 | 12.5 | 28 | 25-75 | 210 | 52 |
φ2200×4500 | 15.6 | 35 | 31-94 | 245 | 54 |
φ2400×3600 | 15 | 34 | 30-90 | 280 | 60 |
φ2400×4500 | 18.7 | 42 | 37-112 | 320 | 71 |
φ2700×3600 | 18.8 | 42 | 38-113 | 380 | 82 |
φ2700×4500 | 23.5 | 53 | 47-141 | 480 | 90 |
φ3200×4500 | 33.5 | 75 | 67-201 | 800 | 137 |
φ3600×4500 | 42.8 | 96 | 86-257 | 1120 | 200 |
Rod Mill
Rod Mill,Rod Mill Grinder,Dry Grinding Rod Mill,Coal Grinding Mill,Industrial Rod Mill
Zhengzhou Zhongding Heavy Duty Machine Manufacturing Co.,Ltd. , http://www.zonedingmac.com