Toyota 8FBN Series 1.5-3.0 Ton Electric Forklift

Forklift brand: Toyota Forklift series: Toyota 8 series electric forklift
Forklift classification: counterbalanced electric forklift truck model: 8FBN15/8FBN16/8FBN18/8FBN20/8FBN25/8FBN30
Rated load: 1.5T, 1.6T, 1.8T, 2.0T, 2.5T, 3.0T
Turning radius: 1770MM (8FBN15/8FBN16), 1780MM (8FBN18), 1980MM (8FBN20), 2000MM (8FBN25), 2210MM (8FBN30)
Forklift full width: 1060MM (8FBN15), 1065MM (8FBN16/8FBN18), 1180MM (8FBN20/8FBN25), 1235MM (8FBN30)
Top guard height: 2085MM (8FBN15/8FBN20/8FBN25), 2095MM (8FBN16/8FBN18), 2255MM (8FBN30)
Voltage/Capacity (Standard): 48V/390AH (8FBN15/8FBN16/8FBN18), 48V/470AH (8FBN20), 48V/565AH (8FBN25), 80V/370AH (8FBN30)
Drive motor: 7.6KW (8FBN15/8FBN16/8FBN18), 10.7KW (8FBN20/8FBN25), 11.9KW (8FBN30)
Lifting motor: 9.5KW (8FBN15/8FBN16/8FBN18), 12.2KW (8FBN20/8FBN25), 14.4KW (8FBN30)

Forklift features:
1. Toyota AC motors and AC motors are used for both Toyota and hydraulic motors. When the forklift is being maintained, the DC DC motor needs to replace the running motor contactor and replace the motor running motor brushes. The AC DC motor does not need to replace these consumable parts. It has been hailed as a true “maintenance-free motor” and uses AC AC. The motor can significantly reduce forklift after-sales maintenance costs, while achieving higher operating efficiency and longer working hours.

2. With the function of regenerative braking, in the following operations, including stopping regenerative braking, regenerative braking before and after reversing, regenerative braking of the ramp, and regenerative braking of the brake stroke sensing, the corresponding operation will automatically trigger regenerative braking. The battery recovers energy, and the actual operation of the submerged city is practical. At the same time, the wear of the brake pads can also be reduced, and the maintenance cost of the forklift can be effectively reduced. Among them, the technology is relatively good. The brake stroke senses regenerative braking. After the brake pedal is started, the brake stroke sensing regenerative brake will increase the regenerative braking amount according to the pedal stroke. When the pedal stroke exceeds a certain limit, it will At the same time, the mechanical brake is started. Under the premise of ensuring the braking force, the amount of energy regeneration is increased and the actual operation time is prolonged.

3, the top guard is the current high-grid design, can provide the driver with a good view of the top; 300MM small-diameter steering wheel, right display and stand measurement shelf tilt design ensures that the forklift driver has a more ideal front Vision. These perfect designs can effectively improve the driving safety performance of the forklift.

4. With the optional new active stability system (SAS), this system has four major control functions, including speed/acceleration control, gantry tilt control, full hydraulic steering synchronization control, turning speed control, new optimization of the new initiative The stable system can make the forklift work more stable. The details of major control systems are as follows:
★ Running speed/acceleration control: Pass the truss sensor and load sensor of SAS control system to sense the height of the mast and the weight of the cargo. When the sensor detects that the mast is in a high-lift state, the vehicle is restricted according to the sensed weight of the cargo. The high driving speed is limited from 0km/h to 8km/h. At the same time, even if the driver slams the throttle or shifts the direction control lever from neutral to the driving position, the lifter is lifted and there is cargo. Acceleration will also be limited.
★ Mast tilt control: This includes three controls, one is the gantry forward tilt angle control, one is the gantry forward and backward tilt speed control, and one is the fork automatic horizontal control. The gantry forward tilt angle control is relatively easy to understand; the gantry forward and backward tilt speed control is based on the height of the gantry lift detected by the sensor of the SAS control system and the weight of the cargo to automatically control the forward tilt angle and the forward tilt angle of the mast, and is effective. To prevent the forklift from tipping over or the falling of the cargo; the automatic horizontal control of the fork presses the automatic horizontal button on the tilting joystick to automatically stop the fork in the forward or backward tilting operation in the horizontal position.
★ Full-hydraulic steering synchronous control: By adopting full-hydraulic steering synchronous control, a smaller turning radius is achieved during operation, and the steering wheel angle and rear wheel steering angle are matched by the solenoid valve correction, thereby improving the control of the forklift in straight driving operation. This feature can be matched.
★ Turning speed control: limit the forklift's driving speed during cornering, and achieve better stability when turning with the combination of high-position Rear Axle.

5, operator presence sensing system, the world famous OPS system. The loading and unloading of the OPS function can help prevent major accidents such as being caught by a gantry or a stand; the OPS function can help prevent the driver from leaving the seat; the OPS alert function, the OPS controller passes the sensor under the ORS seat. Once the driver is detected to leave the seat, the warning will sound and the OPS warning light on the display will light up. In addition, the OPS also has a return-to-stop function. As long as the steering lever does not return to the neutral position, the OPS function cannot be released; ORS Seat, a patented technology that Toyota Forklift applied for, can provide drivers with a more comfortable driving environment and will not feel tired even if they work for a long time.

6. The self-aligning type parking brake provides the driver with a more spacious driving space. The self-aligning type parking brake warning function can prompt the driver to start the parking brake.

Forklift launch: October 2011

Forklift Forklift Blog/blog_40326233.htm

China Gold Forklift Blog / niuli021