![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
The introspective method of the sewage suction truck (garbage truck) belt is very simple. First, introspect the tension of the belt. At this time, you can use the thumb to strongly press the belt between the two pulleys. The pressing force is about 10kg. Assuming that the belt is about 10mm, the belt tension is considered suitable. Assuming that the amount of reduction is excessive, the tension of the belt is considered to be insufficient. Assuming that there is almost no reduction in the belt tension, the tension of the belt is considered excessive. In the absence of tension, the belt is slippery. When the tension is too large, it is very easy to damage the bearings of various auxiliary machines. For this purpose, the relevant adjusting nuts or bolts should be loosened and the tension of the belt should be adjusted to the optimum shape.
In addition, the maintenance of the sewage suction truck (garbage truck) must also pay attention to the wear of the belt. Old belts are worn out and the contact area between belts and pulleys is drastically reduced. At this time, just press the belt with force and the belt sinks deep into the groove of the pulley. The belt rubber also has an aging problem. If the belt rubber is seriously aged, it must be changed in time.
The sewage suction truck ( garbage truck ) engine is the brain of the car. If the engine is bad, it means that a car is useless. Sewage vehicles (garbage trucks) are required to run on the road every day. If they are used for a long time, they may cause wear or aging of the engine belt. Therefore, after a certain period of time, the owner of the vehicle should begin to inspect the belt so as to avoid unnecessary troubles.
stainless steel screen mesh is woven with stainless steel wire such as 201, 202, 304, 304L, 316, 316L etc. the weaving type for screen mesh is determined according to our customer. Such as plain weave, plain dutch weave, twill weave, dutch twilled weave, and also for material, wire diameter, mesh size, width can also be customized. The Stainless Steel Woven Mesh is anti-corrosion, wear-resistance, heat-resistance, and acid-resisting, based on this characteristics, the stainless steel woven mesh is extensively used in mining, chemical industry, food industry and pharmaceutical industry.
Stainless steel screen mesh material:
304, 316, 304L, 316L, 430, 310s etc.
Wire diamter: 0.025mm to 18mm
Weaving method: plain weave, plain dutch weave, twill weave, dutch twilled weave
1. Plain Weave: also called tabby weave, linen weav or taffeta weave, is the most basic type of weaves. In plain weave, the warp and weft are aligned so they form a simple criss-cross pattern. Each weft thread crosses the warp threads by going over one, then under the next, and so on. The next weft thread goes under the warp threads that its neighbor went over, and vice versa.
2. Twill Weave: In a twill weave, each weft or filling yarn floats across the warp yarns in a progression of interlaces to the right or left, forming a distinct diagonal line. This diagonal line is also known as a wale. A float is the portion of a yarn that crosses over two or more yarns from the opposite direction.
3. Plain Dutch Weave: similar with plain weave, just the weft and warp wire have different wire diameter and different mesh size.
4. Twill Dutch Weave: similar with twill weave, just the weft and warp wire have different wire diameter and different mesh size.
5. Reversed Dutch Weave: difference from standard Dutch weave lies in the thicker warp wires and less weft wires.
Stainless Steel Screen Mesh
Stainless Steel Screen Mesh,Stainless Steel Vibration Mesh,Stainless Steel Vibrator Mesh,High Frequency Vibrator Mesh
Anping Huahaiyuan Wire Mesh Co.,ltd , http://www.crusherscreenmesh.com