Laser cutting machine maintenance and common sense

[New weather after year, cutting machine through the bottom price. The lowest price of the entire network, all kinds of custom cutting machine will be 50% discount wholesale order price, a small piece of drawings to achieve a three-dimensional 3D cutting machine parts, where to set where, customers no longer have to worry about no supply and reserve price . What are you waiting for? The reserve price is known to you. You haven't asked if the inquiry is low. For details, please contact the official website of China Cutter Trading Co., Ltd., Tel: :/ Reference: Cutting Machine
There are many types of cutting machines, laser cutting machines are the most commonly used, and it is very important to use the daily maintenance and maintenance of laser cutting machines. The following mainly describes from six aspects.
1. Recycled water replacement and tank cleaning. Make sure that the laser tube is full of circulating water before the machine works. The water quality and temperature of the circulating water directly affect the service life of the laser tube. Therefore, regular replacement of circulating water and cleaning of the tank are required. This is best done once a week.
2. The fan is clean. The long-term use of fans in the machine will cause a lot of solid dust to accumulate in the fan, causing the fan to generate a lot of noise, and it is also not conducive to exhaust and deodorization. When there is a shortage of suction from the fan, the fan must be cleaned.
Three. Lens cleaning. There will be some mirrors and focusing mirrors on the machine. The laser is reflected and focused by these lenses and emitted from the laser head. The lens is easily stained with dust or other contaminants, causing loss of the laser or damage to the lens. So clean the lens every day. Attention should be paid when cleaning: 1. The lens should be gently wiped, and the surface coating should not be damaged; 2. The wiping process should be carried out gently to prevent dropping; 3. When the focusing lens is installed, be sure to keep the concave face down.
4. The rails are clean. As one of the core components of the equipment, guide rails and linear shafts function as guides and supports. In order to ensure the machine has a high processing accuracy, it requires its guide rails, straight lines have a high guide accuracy and good movement stability. During the operation of the equipment, a large amount of corrosive dust and fumes will be generated during the processing of the workpiece. The smoke and dust will be deposited on the surface of the guide rails and linear shafts for a long time, which will have a great influence on the processing accuracy of the equipment and will Corrosion points are formed on the surface of the linear axis of the guide rail, shortening the service life of the equipment So clean the machine rails every two weeks. Turn off the machine before cleaning.
Five. Screws, couplings fastening. After working for a period of time, the motion system will loosen the screws and couplings at the motion joints, which will affect the smoothness of the mechanical movement. Therefore, during the operation of the machine, it is necessary to observe whether the transmission components have abnormal noises or abnormal phenomena and find the problems in time. Sturdy and maintenance. At the same time, the machine should use the tools to tighten the screws one by one. The first sturdiness should be about one month after the device is used.
6. Inspection of the optical path. The optical path system of the machine is completed by the reflection of the reflector and the focusing of the focusing lens. There is no offset problem in the optical path of the focusing mirror, but the three mirrors are fixed by the mechanical part and have a high possibility of offset. Although offset does not occur in normal situations, it is recommended that users check whether the light path is normal before each work.
The importance of the maintenance and maintenance of the laser cutting machine is very strong, it is not very mediocre and mechanical, so it should be maintained when used.
[I can't think of it. I can't do it. Change your style from now on. Opening the Chinese cutting machine trading network is equivalent to opening up your wealth road, come and click on the website now! Reference: Cutter Editor: kswkfhl

Breif Introduction of Feed Grinder:

The machine structure is reasonable, durable, safe and reliable, easy to install, easy to operate, small vibration and high efficiency.Mainly used in feed grain .
The more cards 40,50,65 vibration mill series is my factory styling products, it is crushed PVC foam board, rubber and all kinds of straw, weeds, the best equipment, widely used for feed mills,farms, organic fertilizer factory, Chines herbal medicine and chemical.Deeply welcomed by the general customers.

Features of Feed Hammer Mill:

1. It is simple structure, safe, dependable, easy to mount and operate, low vibration, high output
2. All of our rotors pass an accurate dynamic balancing test, resulting in low noise and smooth running.
3. Hammers edge are vacuum-welded by special alloy steel, resulting in long service life
4. The imported components are used for key parts, resulting in long service life and low maintenance cost.

Parameters of Corn Hammer Mill:

Details of Feed Grinder:

Roter and Hammers of Feed Grinder

Screener of Feed Grinder:

Feed Grinder

Feed Grinder,Feed Grinder Machine,Feed Hammer Mill Grinder,Quality Feed Grinder

Shandong Rotex Machinery Co.,Ltd , http://www.woodpelletmachinery.com