How to protect the wrecker's water pump cycle

1, first check the wrecker belt and pump damage and under no circumstances wear, wear in the event of a more serious case, the parts must be replaced immediately. Carefully check the degree of wear on the shaft of the pump shaft, whether the shaft end threads are damaged, and whether they are bent. Carefully inspect the blade above the impeller for damage and how well the shaft hole is worn. Bakelite washers and water seals should be replaced if they exceed the normal use.  

2. After removing the wrecker's water pump, you can first disassemble the water pump according to the sequence of the steps in each step, clean the parts of each part that have been disassembled, and then check one by one to see if the parts are There are defects such as wear or cracks. If more serious defects must be replaced immediately.

3. If the wrecker's water seal wears out, use an emery cloth to polish it. If it is a serious degree of wear and tear, it should be promptly replaced. If the water seal seat has scratches that are more fragile, use a flat reamer or make repairs on the rim. And during the overhaul, the components of the water seal should be replaced with new ones.  

4. If the following damage on the pump body should be repaired: a length of 30 mm, there is no crack extending to the bearing seat hole, and there is a place where the flange of the cylinder head is broken. There is damage to the oil seal seat hole. The bearing of the Wrecker's water pump should not be bent more than 0.05mm, if it should be replaced immediately.

5, in the inspection of the wrecker's water pump bearings, to see if there is abnormal ringing and whether it is flexible, if this is the case, then it shows that the bearing has a problem.  

6. After the wrecker 's water pump is installed, use the hand to turn it. The pump shaft of the vehicle should be in a condition where there is no rubbing of the impeller and the pump casing and the stuck condition. Then continue to check the water pump discharge problem. If there is a fault in the water pump and the coolant will not work properly, the performance of the pump will not be fully realized.

Electric Mountain Bike

An electric mountain bike,also known as an e-MTB,is a type of mountain bike that is equipped with an electric motor and abattery.The electric motor provides assistance to the rider when pedaling,making it easier to climb hills and traverse rough terrain.EMTBs are designed to be rugged and durable with features such as full suspension,wide tires, and powerful brakes.They are also equipped with a range of electronic components,including a control unit that allows the rider to adjust the level of assistance provided by the motor.One of the main advantages of an e-MTB is that it allows riders to tackle more challenging terrain and cover greater distances than they would be able to on a traditional mountain bike. Thismakes makes it a popular choice for riders who want to explore new trails or push themselves to new limits.However, e-MTBs are also controversial, with some traditionalists arguing that they take away from the physical challenge and purity of mountain biking.Despite this, the popularity of e-MTBs continues to grow, with many riders embracing the technology and the new opportunities it provides.

Electric Mountain Bike,Giant Ebike,Giant Electric Mountain Bike

Ejoysport Technology (SuZhou)Co.,LTD , https://www.toperiding.com