Dx-35 Annular Cutter Magnetic Base Drill

Model NO.: DX-35
Precision: High Precision
Certification: CE, ISO 9001, ISO4001
Condition: New
Magnetic Adhesion: 10000n
The Type of Shank: 19mm
Stroke: 118mm
Magnetic Base Size: 80*168mm
Input Power: 1100W
The Max Cutting Depth: 50mm
The Max Cutter Capacity: 35mm
Countersunk Drilling: 10-35mm
The Min Cutter Depth: 5mm
Load Speed: 450rpm
Trademark: CHTOOLS
Transport Package: Plastic Box
Specification: 55*22*45cm
Origin: China(Mainland)Zhejiang
HS Code: 8459290000
Dx-35 Annular Cutter Magnetic Base Drill
DX-35 Annular cutter Magnetic Base Drill

Magnetic Drill DX-35 

Twist drill: φ 13mm

Rated voltage: 220V

Rated input power: 1100W

No-load speed: 450RPM

Max attraction: 10000N

Max travel: 118mm

Drill capacoty: 35mm

Cool mode: Automatic Internal Cooling

Drill mode: Hand

Core Size: 80*168mm

N. W.: 10.5kgs

G. W.: 14.8kgs

Advantage: Tilt protection design for motor air inlet avoid liquid or debris falling into the inside of motor.

Two- way silding rails , which make the motor height be adjustable according to the different requirement.

Strokr up to 210mm. Rail positioning function, which can make the motor stop at any position to prevent self-
rig decline and damage cutter.

Design of internal self-lubricating function ensure longer life of gear.

Magnetic suction protection ensure that the motor does not start on non-metallic flat or low suction.
 
Type: DX-35 Magnetic adhesion: 10000N
Stroke: 118mm The min cutter depth: 5mm
input power: 1100W Total weight: 10.5kg
The max cutting depth: 50mm The max cutter capacity: 35mm

Dx-35 Annular Cutter Magnetic Base Drill
Dx-35 Annular Cutter Magnetic Base Drill
Dx-35 Annular Cutter Magnetic Base Drill
Dx-35 Annular Cutter Magnetic Base Drill
 

410 Stainless Steel Cut Wire Shot

Stainless Steel Cut Wire Shot is a very important Metal Abrasive.It is often utilized in wheel blasting processes when ferrous contamination of work piece is forbidden. When Blasting stainless work pieces or other metals need to be down as a pristine surface, stainless cut wire may be a very good metal abrasive to take into consideration. Stainless Steel Cut Wire Shot As Conditioned is usually used for shot peening processes on stainless steel or Inconel parts. Stainless steel cut wire can range in size from 0.15mm up to 3.0mm and possibly larger in special order circumstances.

Concerning stainless steel cut wire shot, it has a very bright surface, maintains its shape longer then cast abrasives and it has a dust free surface. Stainless Steel Cut Wire is available as cut or conditioned and with various chemical compositions.The bulk density of stainless steel cut wire shot is very high and must be taken into consideration in relation to its use in equipment. Suitable equipment must be selected to convey Stainless Steel Shot.

410 Stainless Steel Cut Wire Shot,Stainless Steel Shot Blasting,Stainless Steel Shot Peening,Stainless Steel Shot Blasted

Longlived Metal Products Co ., Ltd , https://www.longlivedmetalproducts.com

Posted on