![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
Including 2 pole, 4 pole and 6 pole models, the output power is 0.4k ~ 3.7kW. However, the 6-pole also supports 2.2kW. Among them, the outer casing of the 0.4k and 0.75kW models adopts a steel plate frame. Among the 6 models, models with an output of 0.75 kW and all models with an output of 1.5 to 3.7 kW are all made of aluminum. In terms of price, the 2 pole models are 42,735 to 110,000 4,450 yen (including tax), the 4 pole models are 34,755 to 80,767 yen (tax included), and the 6 pole models are 4,870,020 to 100,000. Japanese yen (including tax). The installation dimensions are the same as the original "ZA·Motor" series, and the two are compatible.
In addition, the company will exhibit the "ZA·Motor Neo100 Outdoor" series at the "TECHNO-FRONTIER 2007" (Makuhari MESSE International Convention and Exhibition Center) held on April 18-20, 2007.
Refrigerated dryer with a cooling condensation working principle, mainly consists of the heat exchange system, cooling system and electrical control system. First, the compressed air into the pre-cooler for air - gas or air - water heat exchange, removing a portion of heat, then into the hot and cold air exchanger, makes heat changes with the cooled air which has come out from the evaporator and cooled to a pressure dew point. Then the compressed air temperature is further reduced. After the compressed air into the evaporator, the heat exchange with the refrigerant, the compressed air temperature to 0-8 °C, moisture in the air at this temperature for precipitation, separated by the gas-water separator, after automatic drainage discharge. The low-temperature and dry air enters cold air exchanger for heat exchange, the output temperature.
Compressed Air Dryer,Air Compressor Dryer,Refrigerated Air Dryer,Air Dryer For Air Compressor,Air Dryer
Quzhou Zhongdu Machinery Technology Co., Ltd. , http://www.moderatemachine.com