Â
It is an important tool for for machining in CNC machining,Its purpose to prevent tools from shanking and to control,make tools vibarte which also called CNC extension rod. Especially as the CNC precision machining developing,the traditional CNC machining from 5000 rpm,6000 to 8000 rpm,after more sophisticated and efficient cutting speed will be developed to more than 20,000 turn. Such high-speed cutting, Higher requirements of sufficient seismic performances is needed carbide stamping pole must be uniform material, consistent performance of its and Precision concentric assurance to achieve such a high speed cutting operation requirements.
Â
Â
Specification |
D |
L |
D1 |
M |
MFT-08-100-M4 |
8 |
100 |
8 |
M4 |
MFT-10-80-M5/M6 |
10 |
80 |
10 |
M5/M6 |
MFT-10-100-M5/M6 |
10 |
100 |
10 |
M5/M6 |
MFT-10-150-M5/M6 |
10 |
150 |
10 |
M5/M6 |
MFT-12-100-M6 |
12 |
100 |
12 |
M6 |
MFT-12-150-M6 |
12 |
150 |
12 |
M6 |
MFT-15-100-M8 |
15 |
100 |
15 |
M8 |
MFT-15-150-M8 |
15 |
150 |
15 |
M8 |
MFT-15-200-M8 |
15 |
200 |
15 |
M8 |
MFT-15.6-150-M8 |
15.6 |
150 |
15.6 |
M8 |
MFT-15.6-200-M8 |
15.6 |
200 |
15.6 |
M8 |
MFT-15.6-250-M8 |
15.6 |
250 |
15.6 |
M8 |
MFT-16-100-M8 |
16 |
100 |
16 |
M8 |
MFT-16-150-M8 |
16 |
150 |
16 |
M8 |
MFT-16-200-M8 |
16 |
200 |
16 |
M8 |
MFT-16-250-M8 |
16 |
250 |
16 |
M8 |
MFT-16-300-M8 |
16 |
300 |
16 |
M8 |
MFT-19-150-M10 |
19 |
150 |
19 |
M10 |
MFT-19-200-M10 |
19 |
200 |
19 |
M10 |
MFT- 19-250-M10 |
19 |
250 |
19 |
M10 |
MFT-20-100-M10 |
20 |
100 |
20 |
M10 |
MFT-20-150-M10 |
20 |
150 |
20 |
M10 |
MFT-20-200-M10 |
20 |
200 |
20 |
M10 |
MFT-20-250-M10 |
20 |
250 |
20 |
M10 |
MFT- 20-300-M10 |
20 |
300 |
20 |
M10 |
MFT-24-150-M12 |
24 |
150 |
24 |
M12 |
MFT-24-200-M12 |
24 |
200 |
24 |
M12 |
MFT-24-250-M12 |
24 |
250 |
24 |
M12 |
MFT-24-300-M12 |
24 |
300 |
24 |
M12 |
MFT-25-150-M12 |
25 |
150 |
25 |
M12 |
MFT-25-200-M12 |
25 |
200 |
25 |
M12 |
MFT-25-250-M12 |
25 |
250 |
25 |
M12 |
MFT-25-300-M12 |
25 |
300 |
25 |
M12 |
MFT-32-150-M16 |
32 |
150 |
32 |
M16 |
MFT-32-200-M16 |
32 |
200 |
32 |
M16 |
MFT-32-250-M16 |
32 |
250 |
32 |
M16 |
MFT-32-300-M16 |
32 |
300 |
32 |
M16 |
MFT-32-350-M16 |
32 |
350 |
32 |
M16 |
MFT-32-400-M16 |
32 |
400 |
32 |
M16 |
Specification |
D (mm) |
D1 (mm) |
L |
L1 |
M |
MFT10-50-150-M6 |
10 |
9.5 |
150 |
50 |
M6 |
MFT12-50-150-M6 |
12 |
11.5 |
150 |
50 |
M6 |
MFT16-50-150-M8 |
16 |
15.5 |
150 |
50 |
8 |
MFT16-50-200-M8 |
16 |
15.5 |
200 |
50 |
8 |
MFT16-70-250-M8 |
16 |
15.5 |
250 |
70 |
8 |
MFT16-85-120-M8 |
16 |
15.6 |
120 |
85 |
8 |
MFT16-95-150-M8 |
16 |
15.6 |
150 |
95 |
8 |
MFT16-145-200-M8 |
16 |
15.6 |
200 |
145 |
8 |
MFT20-40-100-M10 |
20 |
19.6 |
100 |
40 |
10 |
MFT20-90-150-M10 |
20 |
19.6 |
150 |
90 |
10 |
MFT20-140-200-M10 |
20 |
19.6 |
200 |
140 |
10 |
MFT25-40-100-M12 |
25 |
24.6 |
100 |
40 |
12 |
MFT25-85-150-M12 |
25 |
24.6 |
150 |
85 |
12 |
MFT25-135-200-M12 |
25 |
24.6 |
200 |
135 |
12 |
MFT32-70-200-M16 |
32 |
31 |
200 |
70 |
16 |
MFT32-130-300-M16 |
32 |
31 |
300 |
130 |
16 |
MFT32-150-350-M16 |
32 |
31 |
350 |
150 |
16 |
Company Informations
About Lihua Cemented Carbide
Established in 1990, specialized in production carbide products more than 20 years and located in zhuzhou city which is the hometown of tungsten carbide in China .
Our products sold well to worldwide, has been build a long term relationship with our customers from Italy, Portugal, German, Turkey, USA, Mexico, India, Australia, South Africa etc .
Main Products
Our Main products include : Carbide Screwed Boring Bar, Plates, Rods, Sticks, Bushings, TP nozzles, 3D Printer Nozzles, Saw Blades, End Mills & Drill Bits, CNC inserts, Value Seats, Rotary Burrs, wheel cutters, Grits, Cusomized cutter:woodworking tool, V-cutter, textile cutter, shoes cutter ects. Any kinds of customized carbide products .
Monthly Capacity of 15Ton
We have sophisticated equipments, such as Sintering Furnace, Automatic suppress Machine, Manual Hydraulic Suppress Machine, Ball Mill Machine, Drying Machine, Mixing Machine ect, Our production capacity up to 15 Ton per month. Customized is welcome, customized sample can be ready in 3-5 days and 1 day can deliver for stocks.
Strictly QC
We have a professional QC team follow to the System of ISO9001:2008, Covering the Raw Materials Incoming, Production Processes, Finished Products and Packaging to ensure high quality products output.
Â
Other Tungsten Carbide Products in Lihua
Â
Foreign Sales Supervisor: Coco
Mobile: +86 13973352165 (available 24 hours.)Â
Website: http://en.lihuacarbide.com/
Factory Address:Â Tower A, 6th Building, Block C, Auto parts park, Tianyuan zone, Zhuzhou, Hunan, 412000, China
Â
It is an important tool for for machining in CNC machining,Its purpose to prevent tools from shanking and to control,make tools vibarte which also called CNC extension rod. Especially as the CNC precision machining developing,
A Heat Exchanger is a device designed to efficiently transfer or "exchange" heat from one matter to another. When a fluid is used to transfer heat, the fluid could be a liquid, such as water or oil, or could be moving air. The most well known type of heat exchanger is a car radiator. In a radiator, a solution of water and ethylene glycol, also known as antifreeze, transfers heat from the engine to the radiator and then from the radiator to the ambient air flowing through it. This process helps to keep a car's engine from overheating. Similarly, our heat exchangers are designed to remove excess heat from aircraft engines, optics, x-ray tubes, lasers, power supplies, military equipment, and many other types of equipment that require cooling beyond what air-cooled heat sinks can provide.
There are various types of heat exchangers. our heat exchangers provide air-to-liquid cooling, liquid-to-air cooling, liquid-to-liquid cooling, or air-to-air cooling. With air-to-liquid cooling, heat is transferred from the air to a liquid. One example of air-to-liquid cooling is cabinet cooling. With liquid-to-air cooling, the heat is transferred from the liquid to the air. This type of cooling is generally used to cool process fluids. Liquid-to-liquid cooling is also used to cool process fluids, but the heat is removed by another liquid instead of by air. Lastly, with air-to-air cooling, heat is transferred from one air or gas stream to another.
we has been manufacturing one of the most widely used heat exchanger technologies, tube and fin heat exchangers, for more than 20 years. Tube and fin heat exchangers provide air-to-liquid cooling or liquid-to-air cooling. They consist of fin, hairpin tubes, return bends to connect the hairpins, a tube sheet to support and properly align the tubes, a header with inlets and outlets, side plates for structural support, and usually a fan plate. The tubes provide the path for the liquid coolant, and the fin adds surface area for more heat convection. Copper is often selected for tube and fin material due to its excellent thermal conductivity and compatibility with water and ethylene glycol solutions. However, stainless steel is used for tube and fin when it's necessary for the coolant to be deionized water or other corrosive fluids.
ourо oil cooler flat tube heat exchangers also have tubes and fin; however, the tubes are flat instead of round. This helps to minimize pressure drop when oil or ethylene glycol is used as the coolant. The surface area of the flat tubes is also much greater than the surface area of the tubes in a tube and fin heat exchanger. The additional surface area of the tubes in an oil cooler flat tube heat exchanger maximizes heat transfer when poor heat transfer fluids like oil or ethylene glycol are used. These oil cooler heat exchangers consist of fin, flat tubes, a welded header with inlets and outlets, and plates, including an optional fan plate.
Another type of heat exchanger is a plate-fin heat exchanger, which can provide air-to-air, air-to-liquid, liquid-to-air, or liquid-to-liquid cooling. Plate-fin heat exchangers consist of finned chambers separated by flat plates and are circuited in alternating hot and cold fluid passages. Heat is transferred via fins in the passageways, through the separator plate, and into the cold fluid via the separator plate, and into the cold fluid via fin once again. The heat exchanger also has manifold ducting, mounting brackets, and a frame.
Heat Exchanger
Air To Water Heat Exchanger,Heat Exchanger,Commercial Plate Heat Exchanger,Heat Exchanger Unit
Liaoning LotusNine International Trade co.,ltd , https://www.lj-heatexchangers.com